

Step 1: Cut the 8.5" x 11" craft paper in half longways. Creating two 4.25" x 11" rectangles
|
Step 2: Fold one of the rectangles in half long ways with a bone tool.
|

Step 3: Use the hole puncher to make a hole in the middle of the folded paper. Making sure to go through both layers.
|
Step 4: Use a small side of the second rectangle and center the punched hole
|

Step 5: Using the sides of the other rectangle to keep lines straight, draw two lines down to the center of the paper.
|
Step 6: Now using the long side of the second rectangle, draw two horizontal lines from the edges to meet the vertical lines.
|

Step 7: Cut both sides of the folded craft paper along the lines you created.
|
Step 8: Open up everything and it should look like this.
|

Step 9: Using the bone tool again, fold the little ends to meet.
|
Step 10: Cut two slits on the bottom left and two on the bottom right where the arms met.
|

Step 11: Using the bone tool again, fold the little ends to meet.
|
Step 12: Cut two slits on the bottom left and two on the bottom right where the arms met.
|

Step 13: Fold it over & ta-da!
|
Optional Step: Write /print /stamp /etc the product info
|